Artu Porcelain Plus 01425 Diamond-Coated Drill Bit – For Glass, Tile, and Hard Ceramic Surfaces

Description

ARTU® Drill Bit, 5/16 in Drill, 4-1/2 in Overall Length, 2-3/8 in Cutting Depth, 2-3/8 in Flute Length, Parabolic Flute, Straight Shank, Cobalt Tungsten Carbide, Cut Materials: Porcelain Tile

Features:

• Tile should be on a level surface
• Operate drill motor between 400 to 600 rpm higher speeds will damage bit, reducing the number of holes the bit can effectively drill
• First, drill a small hole with a 5/32 in PORC+ bit and then use a larger bit depending on hole required (3/16, 1/4, 5/16, 3/8 and 1/2 in)
• Use some pressure during drilling, however, too much pressure can make the bit move and cause the hole not to be centered as marked and could also cause the tile to break
• To extend the life of the bit, let it cool down for several minutes between each hole

Other Attributes:

• SKU: 2220598
• Drill Size: 5/16
• Overall Length: 4-1/2
• Cutting Depth: 2-3/8
• Flute Length: 2-3/8
• Flute Type: Parabolic
• Shank Type: Straight
• Material: Cobalt Tungsten Carbide
• Cut Materials: Porcelain Tile

Documents:

Technical Bulletin
Specification Sheet

Warning:

California Proposition 65 Warning.